Are you building a new home? Perhaps you plan to renovate your home. Ceramic tile is a plan coverage. This material is the choice of most homeowners. For this reason, good tiler doing a roaring trade. You can work rapidly, but resulted in a considerable amount.
Tile setting is not that difficult. Anyone can learn to fix the tiles. Just like any other house project can be done with enthusiasm from one person to carry out practical tasks.
CeramicsTiles are one of the best floor coverings because of its duration. Ceramic tiles will last from generation to generation without major repairs. This is one of the floors that require little maintenance. Because it is resistant to stains, sweeping, vacuuming and washing floors regularly enough to obtain a clean surface.
It is important to learn to set ceramic tile beginning of the project in order to avoid costly mistakes. Incorrect setting may cause tilecracked tiles, water infiltration, and additional costs if you wasted too many boxes to be addressed improperly.
Below is a step by step guide on how to lay ceramic tile.
Prepare the surface. This basic foundation must be cleared and cleaned. Measure the area and are used to calculate the number of stones.
The next step is the layout. Find the center of the room, measuring the length and width. Making the lines of chalk in the soil,These serve as a guide. To see how it would like the finished floor, lay the tiles without the application of adhesives.
The next step is to set the spread of the adhesive or thin. Professional tilers use adhesive powder mixed with water. You can use a ready-mixed thin in September to the hassle of mixing to avoid too. Thin sets are available in different colors. You can add the color, the color of the walls was chosen. Spread the set fine, using anick cutting spatula. The mark will serve as a tool nick measure to ensure that the correct amount is distributed in sets thinner.
Set the tile with the lines as a guide. Do not use tile spacers to ensure that the tiles are distributed evenly. Cut into pieces suitable for tile and bottom edges mounted in the games room. The tiles must be authorized for a couple of days after which you can now apply the mortar.
Apply the mortar. Make sure you fill in the gaps between the tiles.Grout must be mixed with water to the consistency that would be easy to achieve. Use a sponge and water to remove excess grout from tiles laid recently.
Machining ceramic is better, before the other devices are installed, implemented. This is to avoid the need to cut tiles to fit the devices. But if the house is rebuilt, and you must remove the old floor to ensure that no damage has rig with linen and towels as a result.
ไม่มีความคิดเห็น:
แสดงความคิดเห็น